1/2″x 1/8″ Bushing (SxT)

Convert Any Standard Tee into a Misting Point.

The 1/2″ x 1/8″ Bushing (SxT) is the essential adapter for integrating high-quality misting nozzles into a standard PVC pipe system. Designed with a 1/2″ Spigot end, this bushing glues directly inside the socket of a standard PVC Tee. The internal 1/8″ Female Pipe Thread (FPT) is perfectly sized to accept our Superfine Misting Nozzles.

This flush-fitting adapter allows you to build a custom, professional-grade misting line using readily available Schedule 40 PVC components. It provides a secure, leak-proof mounting point for cooling patios, greenhouses, or animal enclosures without the sag or flexibility of poly tubing.

• Universal Compatibility: Fits inside any standard 1/2″ Schedule 40 Slip fitting (Tees, Elbows, or Couplings), giving you complete design freedom.
• Low Profile: Sits flush within the fitting for a clean, professional look that doesn’t protrude excessively.
• High Pressure: The solvent-welded connection creates a bond as strong as the pipe itself, easily handling the pressure required for fine misting.
• Precision Threading: The 1/8″ FPT outlet ensures a tight seal with brass or plastic misting nozzles.

Verify your fitting sizes.

Transform a standard tee into a mister.

Step 1: Prep the Tee
Clean the inside socket of your 1/2″ PVC Tee (sold separately). Apply PVC Primer to the tee socket and the outside (spigot end) of the bushing.

Step 2: Glue the Bushing
Apply PVC Glue to both surfaces. Insert the bushing fully into the tee socket. Give it a quarter turn and hold for 30 seconds to set.

Step 3: Install Nozzle
Once the glue has cured, carefully screw your 1/8″ MPT Superfine Misting Nozzle into the threaded center of the bushing. Hand tighten only.