Beat the Heat with Low-Flow Misting
As late spring turns into the heat of summer, keeping your outdoor spaces comfortable and your greenhouse plants safe from heat stress is essential. The Cool Breeze Misting Nozzle (5-Pack) provides an incredibly efficient, low-flow, wide-angled spray designed perfectly for cooling large areas. Emitting only 3/4 or 1 gallon per hour, it drops ambient temperatures through rapid evaporation without soaking the area below. Available with either a 1/4″ barbed base for quick insertion into poly tubing or a 10-32 threaded base for rigid PVC setups, these versatile nozzles are ideal for everything from dog runs to backyard patios. Pair them with 1/2″ mainline tubing overhead to build your ultimate summer oasis.
- Ultra-Low Flow Rates: Available in 3/4 GPH and 1 GPH models. The extremely low water volume means you can run multiple nozzles simultaneously to drop air temperatures efficiently without wasting water.
- Versatile Applications: Perfect for cooling down patios, pool areas, outdoor parties, barn stalls, dog runs, arbors, trellises, and achieving greenhouse temperature control.
- Two Base Options: Choose the 1/4″ Barb base to plug directly into flexible poly drip tubing, or the 10-32 Threaded base for screwing into rigid risers or tapped PVC pipe.
- Wide-Angle Coverage: Disperses a fine mist over a 2.5-foot to 3-foot diameter, ensuring maximum evaporative cooling across your targeted space.
Review the exact performance metrics to choose the right misting nozzle configuration.
- Operating Pressure: 35 to 80 PSI (Requires high pressure for a fine mist)
- Package Quantity: Sold in 5-Packs
| Part | Connection Type & Flow | Spray Diameter |
|---|---|---|
| MND34B | 1/4″ Barb (3/4 GPH) | 2.5 Feet |
| MND1B | 1/4″ Barb (1 GPH) | 3.0 Feet |
| MND34T | 10-32 Threaded (3/4 GPH) | 2.5 Feet |
| MND1T | 10-32 Threaded (1 GPH) | 3.0 Feet |
Build your cooling system quickly depending on your chosen base style.
Step 1: Prep Your Overhead Line
Suspend your supply line (such as 1/2-inch poly tubing) above the area you want to cool, like a patio perimeter or dog run.
Step 2: Create an Insertion Point
If using poly tubing, use a key punch tool to puncture holes precisely where you want each misting nozzle placed.
Step 3: Insert the Nozzle
Barb Models (MND34B, MND1B): Push the 1/4-inch barb directly into the punched hole in your poly tubing until it snaps tight.
Threaded Models (MND34T, MND1T): Twist the 10-32 threads directly into a tapped PVC pipe, rigid riser, or compatible threaded component.
Step 4: Check Pressure
Turn on the water supply. Ensure your system pressure is at least 35 PSI (up to 80 PSI) to atomize the water into a fine, cooling mist.
