Commercial Reliability Powered by Batteries
The DIG 3/4″ DC Valve with Flow Control is a heavy-duty inline irrigation valve designed to operate reliably where traditional electrical power isn’t available. Equipped with a DC latching solenoid, this valve is engineered to be paired seamlessly with battery-operated irrigation timers, making it the perfect solution for remote garden beds, highway medians, or properties without an outdoor AC outlet.
Don’t let the battery operation fool you—this valve is built to handle professional demands. It features a rugged, glass-reinforced nylon body capable of withstanding pressures up to 150 PSI. The internal self-cleaning diaphragm ensures continuous operation even when pulling from slightly contaminated water sources. Combined with a smooth open/close mechanism that prevents destructive pressure surges, this valve offers superior hydraulic performance in a compact footprint.
- Battery Operated (DC): Features a DC latching solenoid that allows the valve to be automated using battery-powered controllers, entirely eliminating the need for hardwired electrical trenching.
- Self-Cleaning Diaphragm: The internal diaphragm design actively resists clogging, ensuring reliable activation even in moderately dirty water applications.
- Anti-Water Hammer: Engineered with a smooth opening and closing mechanism that protects your expensive mainline PVC pipes from sudden, destructive pressure surges.
- Precision Flow Control: The integrated flow control handle lets you manually dial back water flow to prevent over-pressurizing delicate drip zones or small sprinkler heads.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Valve Configuration | Inline Globe Valve |
| Operating Flow Range | 0.1 to 28 Gallons Per Minute (GPM) |
| Operating Pressure Range | 10 to 150 PSI |
| Inlet / Outlet Size | 3/4″ Female Pipe Thread (FPT) |
| Solenoid Power | DC Latching (Requires Battery Controller) |
| Body Material | Glass-Reinforced Nylon |
Follow these steps to securely install your battery-operated valve.
Step 1: Install the Enclosure
As an inline valve without an atmospheric vacuum breaker, it must be installed underground inside a protective plastic valve box. Ensure the box is large enough to house both the valve and your battery-operated controller.
Step 2: Connect to Mainline
Wrap Teflon tape around your 3/4″ male PVC threaded adapters and screw them into the valve’s inlet and outlet ports. Verify the directional arrow on the valve body points downstream.
Step 3: Wire the DC Controller
Splice the two wires from the DC latching solenoid directly to your battery-operated controller. Use silicone-filled waterproof wire nuts to ensure the connection won’t short out in the damp valve box.
Step 4: System Flush
Turn on the main water supply. Open the internal bleed to manually activate the valve, flushing out dirt or PVC glue residue. Close the bleed, test the timer activation, and adjust the top flow control handle as needed.
