Efficient, Convenient Drip Tape for Small Gardens & Raised Beds
The DripWorks 100′ Drip Tape Roll provides an incredibly easy, efficient, and affordable way to irrigate small row crop areas, residential gardens, and raised beds. Shipped in a highly convenient dispenser box, this 100-foot roll prevents tangling and makes rolling out your irrigation lines a breeze. Featuring precision-designed internal flow paths, this tape ensures superb watering efficiency while actively reducing the risk of clogs. This tape delivers professional-grade uniformity that can last for years with proper care and winterization.
Available in 8 mil and heavy-duty 15 mil thicknesses, you can select the perfect emitter spacing and flow rate to match your soil type and plant needs. It operates flawlessly on low-pressure gravity systems or standard household spigots equipped with a pressure regulator (4-15 PSI). Whether you lay it directly on the surface, hide it under mulch, or bury it shallowly, this 5/8″ tape provides unbeatable water efficiency. For a secure, leak-free setup, ensure the tape is warm and pliable before attaching it to standard 5/8″ drip tape fittings.
- Handy Dispenser Box: Makes installation incredibly fast and prevents the tape from unspooling, tangling, or kinking during setup.
- Affordable Efficiency: A highly cost-effective way to deliver water uniformly across small market farms, home gardens, and raised bed layouts.
- Superior Clog Resistance: Precision-designed internal flow paths help trap and flush out debris, extending the life of your drip system.
- Versatile Placement: Operates perfectly whether installed above ground, covered with protective mulch, or buried shallowly in the soil.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Inside Diameter | 5/8″ (16mm) |
| Roll Size | 100 Feet (in Dispenser Box) |
| Recommended Pressure | 4 PSI to 15 PSI Maximum |
| Filtration Requirement | 155 Mesh Minimum |
| Compatible Fittings | 5/8″ Drip Tape Loc Fittings (e.g., LSB, LSBSO, LSGS, LSPLUG) |
15 Mil Drip Tape Rolls (Heavy Duty)
| SKU | Emitter Spacing | Flow Type | Max Row Length | Flow per 100′ @ 8 PSI | Max Row w/ LSB Fitting | |
|---|---|---|---|---|---|---|
| GPH | GPM | |||||
| TDE1508L100 | 8″ OC | Low | 700 ft. | 20 GPH | 0.34 GPM | 380 ft. |
| TDe1508H100 | 8″ OC | High | 500 ft. | 40 GPH | 0.67 GPM | 200 ft. |
8 Mil Drip Tape Rolls (Standard Duty)
| SKU | Emitter Spacing | Flow Type | Max Row Length | Flow per 100′ @ 8 PSI | Max Row w/ LSB Fitting | |
|---|---|---|---|---|---|---|
| GPH | GPM | |||||
| TDE804100 | 4″ OC | Medium | 350 ft. | 60 GPH | 1.0 GPM | 140 ft. |
Install your 100′ Drip Tape Roll quickly and correctly to prevent leaks.
Step 1: Regulate Your Pressure
This tape operates strictly between 4 and 15 PSI. Ensure your head assembly includes a low-flow pressure regulator (10 PSI or 12 PSI) and a minimum 155-mesh filter.
Step 2: Warm the Tape
Pro-Tip: To create a tight seal, leave the roll in the sun for a few minutes so the tape becomes warm and pliable before attempting to attach any fittings.
Step 3: Connect to Mainline
Pull the tape directly from the dispenser box down your crop row. Punch a hole in your poly mainline header and insert a 5/8″ tape start fitting (like an LSB or LSBSO). Slide the warm drip tape over the barb and twist the locking nut tightly over the tape to secure it.
Step 4: Seal the Ends
If leakage occurs at the fitting, a gentle 1/4 turn with pliers on the locking nut should suffice. Once the system is flushed and the water runs clear, terminate the end of the row using a 5/8″ tape end fitting (like an LSGS or LSPLUG).
