Instantly Convert Sprinkler Heads to High-Efficiency Drip Zones
The H2OWize Spray to Drip Converter (Retro-Drip Kit) is a simple, highly effective solution designed to transform any existing pop-up spray head into a water-saving, low-flow drip irrigation zone in minutes. Instead of tearing up your yard to trench new pipes, simply unscrew your old, inefficient sprinkler head and thread this low-profile retrofit kit directly onto the existing underground riser. It seamlessly connects to standard 1/2″ mainline tubing or emitter tubing to deliver precise, targeted watering exactly where your newly planted shrubs, flower beds, or vegetables need it.
Engineered for universal compatibility, this all-in-one converter works flawlessly with underground spray bodies from all major irrigation manufacturers. Inside the compact housing, it features a built-in 30 PSI pressure regulator and a 150-mesh screen filter to protect your delicate drip emitters from clogs. Capable of handling high inlet pressures from 15 to 80 PSI and supporting flow rates between 0.5 and 6 Gallons Per Minute (GPM), the kit includes two 1/2″ barbed fittings and one 1/2″ cap. This clever design allows you to run 1/2″ drip line in two different directions, or cap one side off for a single, straight run.
- Fast & Easy Retrofit: Converts an existing sprinkler zone into a highly efficient drip irrigation zone in minutes without any digging or gluing.
- All-In-One Design: Completely eliminates the need to buy separate pressure regulators or inline filters. It is fully integrated into the single compact unit.
- Universal Compatibility: Threads directly onto standard 1/2″ MPT risers and works seamlessly with spray heads from all major manufacturers.
- Dual Directional Output: Includes (2) 1/2″ barb fittings and (1) cap, giving you the flexibility to route tubing in one or two directions from the riser.
- High-Quality Filtration: The internal 150-mesh screen actively removes grit and particulate to keep your downstream emitters clean and functioning.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Product Type | Spray to Drip Retrofit Conversion Kit |
| Inlet Connection | 1/2″ Female Pipe Thread (FPT) |
| Inlet Pressure Range | 15 to 80 PSI |
| Regulated Output Pressure | 30 PSI |
| Supported Flow Rate | 0.5 to 6.0 Gallons Per Minute (GPM) |
| Filtration | Built-In 150-Mesh Screen |
| Included Fittings | (2) 1/2″ Barbed Fittings and (1) 1/2″ Cap |
| Compatible Tubing | Standard 1/2″ Drip Line (All Manufacturers) |
| Brand | H2OWize |
Convert your old spray head to a drip zone safely and effectively.
Step 1: Remove Old Sprinkler
Ensure the water to the sprinkler zone is completely turned off. Dig slightly around the base of the existing pop-up spray head and unscrew it counter-clockwise from the underground threaded riser.
Step 2: Attach the Converter
Thread the inlet of the H2OWize Converter directly onto the exposed 1/2″ riser. Hand-tighten until secure, ensuring the housing sits near grade level.
Step 3: Connect Tubing
Push your 1/2″ mainline tubing or emitter tubing firmly onto one or both of the included barbed fittings. If you are only running tubing in a single direction, use the included cap to seal off the unused side.
Step 4: Routine Maintenance
Periodically (once a season) unscrew the top cap of the converter housing, remove the 150-mesh filter screen, and rinse it under clean water to remove any trapped sediment.
