Flawless, Uniform Watering—Even on Slopes
Achieve perfectly balanced watering across your entire garden—from the highest point of a slope to the very last plant in a long container row. The Antelco Pressure Compensating (PC) Shrubbler is the definitive solution for inconsistent water flow. By delivering a precise, gentle 360° spray pattern, it eliminates dry spots and prevents waterlogged roots. Whether you are running long lines of 1/2″ poly mainline tubing or managing intricate container setups, this emitter ensures every plant receives exactly what it needs to thrive.
- Guaranteed Uniform Watering: An advanced internal silicone diaphragm ensures a consistent flow rate across a wide 15-45 PSI pressure range, solving the most common cause of uneven plant growth on slopes or long tubing runs.
- Gentle 360° Coverage: Delivers a full-circle stream of water that thoroughly hydrates root zones without splashing, disturbing mulch, or causing topsoil erosion.
- Effortless Cleaning: Unlike sealed emitters, the Shrubbler easily twists apart for quick inspection and debris removal, ensuring a long and reliable service life.
- UV-Stabilized Durability: Constructed from high-impact polypropylene engineered to withstand direct sunlight and harsh outdoor weather without degrading.
Detailed specifications for system planning and performance.
| Specification | Details |
|---|---|
| Operating Pressure | 15 to 45 PSI |
| Inlet Connection | 0.16″ Barb (Fits 1/4″ or 1/2″ poly tubing) |
| Materials | UV-stabilized polypropylene body, silicone diaphragm |
| Spray Pattern | 360 Degrees |
| SKU / Patent | Q_DSHP / US Patent 8662414 |
Performance Chart:
| Pressure (PSI) | Flow Rate (GPH) | Spray Diameter |
|---|---|---|
| 15 PSI | 6.6 GPH | 7 Inches |
| 20 PSI | 7.5 GPH | 8 Inches |
| 30 PSI | 8.1 GPH | 12 Inches |
| 40 PSI | 9.3 GPH | 14 Inches |
Set up your precision watering system quickly and easily.
Step 1: Pierce the Tubing
Using a DripWorks key punch or pocket punch tool, create a clean hole directly in your 1/2-inch mainline poly tubing where you want the emitter located.
Step 2: Insert the Emitter
Push the 0.16-inch barbed end of the PC Shrubbler directly into the newly punched hole until it snaps securely into place.
Step 3: Connect Micro Tubing (Optional)
If your plant is situated away from the mainline, insert a 1/4-inch transfer barb into the mainline, connect a length of 1/4-inch micro tubing, and push the Shrubbler barb into the other end.
Step 4: Secure with a Stake
If extending the emitter with micro tubing, use a wire hold-down or dedicated stake assembly to secure the Shrubbler upright, ensuring the 360-degree spray covers the root zone evenly.
