Beat the Summer Heat with Refreshing, Superfine Misting
Why sweat it out through the peak of summer? Even on the hottest, most sultry days, you can completely transform your outdoor spaces with the Superfine Misting Nozzles (5-Pack) from DripWorks. These high-performance fogging nozzles produce microscopic water droplets that flash-evaporate in the air, creating a refreshing curtain of cool air for you, your family, or even your livestock. Designed with a robust 1/8″ Male Pipe Thread (MPT), they easily thread into adapted 1/2″ PVC tees (like the MNTA model) to create highly durable, permanent overhead cooling grids. To prevent clogs and ensure a steady mist, we always recommend pairing these nozzles with a high-quality inline filter at your water source.
- Ultra-Fine Droplets: Producing droplets between 50 and 70 microns, this nozzle ensures rapid evaporation to lower ambient temperatures rapidly without leaving puddles on your patio or deck.
- Ultimate Summer Comfort: The perfect, affordable solution for cooling down pool areas, backyard parties, arbors, trellises, dog runs, and hot livestock barns.
- Rigid PVC Compatibility: Features a secure 1/8″ MPT base designed to thread cleanly into specialized PVC adapter tees, allowing you to build rigid, high-pressure misting lines.
- Anti-Drip Option Available: The Red model (MNRED) features a built-in anti-drip mechanism that instantly stops water flow when pressure drops, preventing annoying drips after the system turns off.
Use the chart below to select the right misting nozzle color for your specific cooling application.
- Connection Type: 1/8″ Male Pipe Thread (MPT)
- Optimal Pressure Range: 40 PSI to 100 PSI
- Package Quantity: 5 Nozzles per pack
- * Spray diameter measured at 6′ height operating at 40 PSI.
| SKU | Color | Angle | Diameter* | Droplet (Microns) | GPH @ 40 PSI | GPH @ 80 PSI | GPH @ 100 PSI |
|---|---|---|---|---|---|---|---|
| MNW | White | 80° | 2′ | 55 | 0.6 | 0.7 | 0.9 |
| MNC | Cream | 105° | 3′ | 60 | 1.1 | 1.4 | 1.6 |
| MNB | Black | 110° | 3′ | 70 | 1.6 | 2.6 | 3.0 |
| Superfine nozzle with Anti-Drip (Does NOT use filter screen) | |||||||
| MNRED | Red | 110° | 2′ | 50 | 0.6 | 0.7 | 0.9 |
Build your rigid overhead cooling system with these threaded nozzles.
Step 1: Prep Your Overhead PVC
Assemble your overhead PVC cooling line using specially adapted 1/2″ PVC tees (like the MNTA or P1218STB) which feature a tapped 1/8″ female pipe thread port.
Step 2: Insert the Filter Screen
If you are using the White, Cream, or Black nozzles, insert the included filter screen into the PVC adapter opening. Note: Skip this step entirely if you are using the Red (MNRED) Anti-Drip nozzle.
Step 3: Thread the Nozzle
Take the Superfine Misting Nozzle and firmly twist its 1/8″ MPT base directly into your prepared PVC adapter tee until it is hand-tight and secure.
Step 4: Verify System Pressure
Turn on your water supply. Ensure your system pressure is regulated high enough—between 40 and 100 PSI—to properly atomize the water into a fine, evaporative mist.
