Thriving Plants on Every Deck. The Simple DIY Solution for Containers.
Potted plants and deck gardens dry out faster than any other part of the garden, often requiring daily attention. The Small Deck Garden Irrigation Kit is the simplest way to automatically water up to 45 pots with zero hassle. This complete package comes with everything you need from the faucet to the last container, allowing you to open the box and start building immediately. Designed for the easiest setup possible, it requires no glue, clamps, or complicated tools—our “Easy Loc” fittings simply push and twist to lock.
This easy-to-install DIY kit promotes lush, vibrant blooms using the included 1/4″ Soaker Dripline and Pot Drippers. This versatile tubing can be looped inside round pots or run straight through window boxes to deliver water gently to the root zone, preventing the runoff common with hand watering. The system is incredibly discreet; the small 1/4″ tubing can be easily tucked behind planters or under railings to keep your deck looking clean.
We have pre-calculated the components so you don’t have to; simply snap the parts together to ensure every container or pot receives uniform hydration. Most gardeners prefer to keep their hose available for cleaning the deck or other tasks, so we highly recommend adding a Brass Y-Splitter to your order so you can run your irrigation system and your garden hose simultaneously.
This system connects easily to any standard outdoor hose faucet.
Step 1: The Header (Faucet Assembly)
If you purchased the kit with Timer, attach the Timer to the faucet first. Next, simply screw on the Filter, next the Pressure Regulator, and finally the Easy Loc Female Hose Start. This entire assembly is commonly referred to as the Header.
Step 2: Lay the Mainline
Run the 1/2″ Mainline Tubing from the Header around the perimeter of your deck or patio. Use the Easy Loc Tee or Coupler to navigate corners. Close the end with a simple Figure 8 End.
Step 3: Connect the Containers
Use the included Punch Tool to punch a hole in the Mainline near each pot. Insert a 1/4″ Transfer Barb and attach the 1/4″ Micro Tubing to run up to the pot or planter box.
Step 4: Layout the Dripline
Inside the container, connect the 1/4″ Soaker Dripline to the Micro Tubing. For round pots, create a loop of soaker line around the plant base. For rectangular planters, run the line straight down the middle. Secure it with the Hold Down Stakes.
For detailed assembly instructions click here, or for more detailed plans see the downloads section below.
