4-Way Multi-Outlet Assembly for Netafim Woodpecker Emitters
The Multi-Outlet Dripper Assembly (DMWASS) splits the output of a single Netafim Woodpecker or Woodpecker Jr. emitter into four individual outlets, making it a popular choice for nurseries, greenhouses, and home gardeners watering multiple containers from one mainline. Each assembly includes two 18″ and two 30″ lengths of 1/8″ poly tubing with arrow drippers already attached, so you can reach containers set at different distances from the emitter.
Need to water even more pots? Add the 4-Way Stackable Assembly (DMWST) to divide flow from one emitter into eight containers. When an emitter isn’t in use, remove the assembly and seal the outlet with a Woodpecker Shutoff Cap. Note: emitters are sold separately.
- Waters 4 Containers at Once: Splits a single Woodpecker or Woodpecker Jr. emitter output into four separate drip points.
- Ready-to-Use Design: Arrow drippers are pre-attached to each of the four tube lengths, so no extra assembly is required.
- Two Tube Lengths Included: Two 18″ and two 30″ tubes let you position drippers at varying distances from the emitter.
- Expandable: Combine with the DMWST Stackable Assembly to water up to 8 containers from one emitter.
- Nursery-Trusted: A popular solution for commercial container growing on nursery tables and in greenhouses.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| SKU | DMWASS |
| Outlets | 4-Way (Flat Assembly) |
| Included Tubing | Two 18″ and two 30″ lengths of 1/8″ poly tubing, each with an Arrow Dripper attached |
| Compatible Emitters | Netafim Woodpecker and Woodpecker Jr. Emitters (sold separately) |
| Expandable To | 8 outlets, when paired with the DMWST Stackable Assembly |
| Flow Rate per Outlet | 1/4 of the emitter’s rated flow (e.g., a 1 GPH emitter delivers 1/4 GPH per container) |
Water four containers from a single emitter in minutes.
Step 1: Punch and Insert the Emitter
Punch a hole in your 1/2″ or 3/4″ mainline tubing and insert a Woodpecker or Woodpecker Jr. emitter.
Step 2: Attach the Assembly
Push the inlet of the DMWASS Multi-Outlet Assembly firmly onto the outlet barb of the emitter until it is fully seated.
Step 3: Position the Drippers
Route each of the four pre-attached tubes (two 18″ and two 30″) to its container, placing the arrow dripper at the base of the plant.
Step 4: Expand if Needed
To water up to eight containers, push a DMWST Stackable Assembly onto the emitter outlet first, then attach the DMWASS Flat Assembly to the stackable unit.
